A Brief Guide About Using Hydraulic Tensioner
Want to know more about hydraulic tensioner? Then you are at the right place. In the below article, you will learn more about hydraulic tensioner and manual tensioner. Let’s have a look now.
The hydraulic bolt tensioner is a type of annular jack that is used in a wide array of applications. . Bolt is used to holding things in the proper place. In that case, the bolt should have 80% maximum tensile strength to maintain the top tension. If you want to know more about hydraulic tensioner and its working, advantages and safety measures, then read the article below:
What Is a Hydraulic Tensioner?
The hydraulic tensioner is commonly used in various industries. It can work more efficiently than other tools with accuracy. The manual tensioner generally works to tighten the bolt. The hydraulic tensioner doesn’t imply forceful turning of the bolt, and here, the flogging spanner is not necessary.
The bolt tensioners are helpful for many tasks like pipeline rangers, heat rangers, pressure vessels, packaging industry, etc. There is a comprehensive range of pneumatic steel strap tensioners available that are used for the optimum solution of bolt tensioning requirements. The use of pneumatic steel strap tensioner is widespread, and you can get several benefits also. Tightening with a hydraulic tensioner can come with several advantages; such as
- It doesn’t need torque for fastening and other tasks.
- Saves up with direct loading capacity.
- It operates very efficiently at a faster rate.
- It can work with accuracy.
- Ideal option for any critical option.
What Are The Main Components Of Hydraulic Tools?
The hydraulic tools work with a combination of other components. Read the part below to learn about those most critical components.
* Puller: Puller is connected internally with the tensioner. It has an outside edge controlled by hand to tighten the bolt. Puller helps by transferring the force in the bolt.
* Cylinder: You can say the cylinder is an annual hydraulic jack. You can see the cylinder in the centre where the puller is connected with the cylinder.
* Bridge: The Bridge is an essential component that protects the cylinder and the puller. It also comes with a circular groove that helps in operating the bridge. Every breeze side has adjustable nuts that efficiently fix the bridge when working.
* Socket: The socket generally fits in hexagon nuts and is found inside the bridge. The tommy bar hole inside the tensioner can replace the need to drill holes in the hexagon nut.
* Bolt and Nuts: Bolts and nuts are one of the most critical components of a hydraulic bolt tensioner. The nuts and bolts are specially given to adjust the tensioner in the required state.
Safety of Hydraulic Tensioner
When you use any hydraulic tensioner, you should be concerned for its safety. The hydraulic tensioner generally works by going from the tensioner pump to load the cell and then to another tensioner. In this case, you are working with high-pressure fluid that can cause massive injury. So, it would help if you took extra precautions.
So, take the necessary steps for proper storage, cleanliness and other storage options. If the tool has worn or damaged signs, you should replace it. Otherwise, it will cause massive injury.
Conclusion
Now you know enough about hydraulic bolt tensioners. I hope the article has helped you greatly, but you can learn more from your nearest manual steel strap sealer dealer. If you have more queries about this tensioner, then you can contact the nearest manufacturer to have a detailed view. Read about the safety instructions and other preventive measures for a safe operation.